Tag Archive
1st Order 2nd Order 2nd order crossover B&C DE12TC Butterworth calculator Cms Compliance Crossover DC Resistance Diaphragm Driver Parameters FIlter Free Air Resonance Fs High Pass human Impedance Inductance Le Low Pass Mmd Mms Motor Strength Moving Mass Passive passive crossover calc Power Qes Qms Re Resistance Resonant Frequency Rms Sd Small speaker project Thiele Thiele Small TS Parameters Vas Vd Voice Coil Xlim Xmax
Thiele Small Parameters
The Thiele Small Parameters (often referred to as T/S Parameters) are provided in specification sheets by most manufacturers – but what are they for? A more detailed explanation of each parameter is provided in the relevant sections, but in simple terms, these parameters define the electromechanical properties of a loudspeaker driver, describing its electrical and mechanical […]
Driver TS Parameters: Re (DC Resistance) & Le (Voice Coil Inductance)
Re is the DC resistance of the loudspeaker’s voice coil, you should not confuse this with impedance, although related, the two are different. Measuring the resistance of a speaker with a multi-meter, the reading you get across the terminals should be close to the manufacturer’s specified Re, it’s not unusual to get a minor variation […]